Atop ABLELink MB5000 Series Manual de usuario descargar pdf (Pagina 25)

User manual Version 1.0

ABLELink

SW5001 Wireless Serial Server

[Main]  [4 Serial Settings]  [2 Baud rate]/ [3 Parity]/[4 Data bits]/ [5 Stop bits]/ [6 Flow control]

Here one may configure alias、baud rate、parity、data bit、stop bit and the type of flow control defined by

the user,

Fig. 23. Serial Setting by Telnet

4.2.8. Configuring packet delimiter

Packet delimiter is a way of controlling the number of packets in a serial communication. It is designed to

keep packets in track. SW provides two ways in parameter setting: (1) Packet delimiter timer and (2)

Character patter terminator. By default, packet delimiter timer is 10 ms. The range of packet delimiter

timer is 10 to 30,000 msec, If “character pattern’ is selected, for a data stream ended with “0x0d0a”, then

the entire data buffer of the serial device is transmitted.

One may change packet delimiter timer follow the steps below.:

Configuring UART/Network Delimiter- Timer

One may choose packet delimiter timer’s value as the packet delimiter indicated in Figure below:

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 61 62

Sin comentarios

Atop ABLELink MB5000 Series Manual de usuario Pagina 25